Erratum non-conforming lot, addition of the logo [NC]. [RP] Lot reserved for professionals. AEV (Air, Water, Wind) test bench Year 2012 including: A quick-fix test wall that allows to test : Joinery, alone or equipped with roller shutters, Roller shutters, Any type of vertical monobloc wall, Maximum dimensions of the elements to be tested of : Maximum height of 2.50m, Maximum length of 3.00m A joinery installation ensuring a centering compared to the air arrivals air intakes. A simple system for adjusting the bench to the joinery. A tightness of the lateral walls between the wall and the joinery to be tested. Means of tightening the joinery allowing to test pieces With important interior overhangs A control by automaton with a recovery of the information on A storage medium (USB key, SD card, etc.) Precise adjustment of the pressures allowing to apply the same value In negative and positive pressure A weather station connected by sensors to the automaton which allows to to realize Temperature, hygrometry and air pressure measurements in automatic A fan equipped with a variator controlled by the automaton, and pressure sensors allowing to carry out tests from -4000 PA to + 4000 PA. The test bench is not in working condition and has not been serviced. Loading and removal at the expense of the purchaser. Visits and removal by appointment at least 48 hours in advance with identification required. Service remettant : ECOLE NATIONALE SUPERIEURE DES MINES D'ALBILieu de dépôt : IMT Mines Albi Carmaux ALL DES SCIENCES 81000 ALBITel : 05 63 49 30 55 Contact : M. TRINQUIER Stephane On appointment.